This is a view of the 1/2" X 6" side vent in the back crevice. The front and middle crevices are vented on each side with 7/16" holes drilled. I used a piece of aluminum soffet vent to cover these side vent holes. The paint used was rustoleum flat black.
There is no vent in the front of the bat house.
Last edited on Sun Dec 9th, 2007 01:58 am by Terry Lobdell
Here is a view of the baffles. I used pet screen with liquid nail and stainless steel staples. The landing pad is about 3 inches. The baffles are staggered about an inch although it's hard to see from this view.
